Cylinder kit - Stage6 Racing 70ccm MkII - ø10mm
The Stage6 Racing 70ccm MkII cylinder kit has been improved in several respects compared to the previous version. It continues with a strong nicasil coating in cylinder passages, but the door times have been optimized so the performance is up to 1hp higher. In addition, it uses a Stage6 R / T Replica piston with a curved top and the same type of piston ring of 0.8 mm as i.a. also used on the Stage6 R / T cylinder kit. To achieve full effect of the kit, it is recommended to use i.a. larger carburetor as well as exhaust. A long-threaded spark plug must be used for this cylinder. The kit is delivered complete incl. gaskets, piston ring, etc. NOTE: ø10mm cross pin. It fluctuates if the kit is delivered with one or more bottom pans. If there is more than one person, it is important that the goal is squish. The kit should run with a squish of 0.75 - 0.85 mm.
Generally | |
---|---|
Bore | ø47,6mm |
Class | Hyper-racing |
Piston pin | ø10mm |
Displacement | 70ccm |
Flush canals | 6 |
Stroke | 39.2mm |
Exhaust port | Two piece |
Material | Alloy |